www.moldknowledge.com
 


    Enviroknowledge Online Training and     
         Education Exclusively for PCI
          Environmental Professionals
BearAcade Product: High Tech Wall Containment

BearAcade™ Sticky Poly products are available in two levels of adhesion (low and medium) in a 4 and 6 mil film. The film is made of a lightweight polyethylene resin blend for excellent toughness. The films are printed with the BearAcade™ trademark to give installers confidence that the correct product has been selected for the various surfaces. Slow, even removal will produce the best results. Diagonal removal of film is recommended.

BearAcade™ Applications
Medium adhesion products are used on textured surfaces, such as:
• Around Drums • Cement Floors • Over Tops of Gaylords & Boxes
• Brick • Concrete Block • Painted Sheetrock
• Cardboard • Heating Vents • Target Tape for Spray Gluing
• Carpet • Light Diffusers • Unfinished Wood
• Ceiling Lights • Over Traditional Poly Film  
• Ceiling Tile & Grid • Painted Plaster  
 
Low adhesion products are used on textured surfaces, such as:
• Ceramic Wall Tile • Lockers • Sealed/Terrazzo Floors
• Finished Woodwork • Painted Door Frames • Vinyl Floor Tile
• Mirrors • Smooth Glass  
 
Free samples are available for customer to determine suitability of
Bearacade™ products for job surfaces.
**Warning: Do Not Use on Tinted Windows**

Warranty:
Americover Inc. warrants that the product will be free from defects in material and workmanship for a period of six months immediately following Buyer’s receipt of the Product, and, in the event that this should occur, the product may be returned to Americover Inc. for replacement. Americover Inc. SHALL NOT BE LIABLE FOR INJURY, LOSS, OR DAMAGES, EITHER DIRECT OR CONSEQUENTIAL ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT. IT IS THE RESPONSIBILITY OF THE BUYER OR USER TO DETERMINE THE SUITABILITY OF THE PRODUCT FOR THEIR INTENDED USE, AND THE PURCHASER AND/OR USER ASSUMES ALL RISKS AND LIABILITIES CONNECTED WITH THE USE OF THE PRODUCT. The warranty shall not apply to damage caused by disasters such as fire, flood and wind, or by actions or inaction’s resulting in damage caused by misuse, mishandling, improper storage, or damage caused during shipping. THE WARRANTY SET FORTH IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND WHATSOEVER, EXPRESS, IMPLIED, AND/OR STATUTORY, AND ALL SUCH OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.
 

  • Hand or machine application; machine application results in a 10 fold increase in the average square feet per hour; significant increase (2 fold) in the average number of criticals per hour.
  • Contractors reduce overall costs, improving profits, and competitiveness to win more contracts.
  • Does not fall from walls - stays up until the job is finished. No time lost reapplying a failed containment.
  • Superior holding power. BearAcade films are fully coated with an adhesive designed for abatement conditions. Holds two times the negative pressure requirements for removal of asbestos.
  • Eliminate “billowing” from wall and floors. Improves vision within the containment, eliminates accidental snagging of the billowing film with tools or equipment, and floors are less slippery than “billowed” floors.
  • Improves clean up and vacuuming. Floor layers are bonded to each other resulting in a surface that is easily cleaned.
  • Eliminates the need for spray adhesive primers during installation.
  • No clean up of adhesive residue prior to repainting.
  • Reduces damage to painted wallboard surfaces, reducing prep work prior to repainting.
  • Superior seal quality of the overall containment. Fully coated sheets result in improved seal over the total containment. Conformance to asbestos abatement regulations.
  • “The BearAcade Way™” was developed and tested by abatement contractors to insure real world performance.

 Copyright © 2000-2009 Ecology College Online. All rights reserved.